Sevigny Competition |
Specifications: |
|
Front Sight: .115” wide x .215” tall, 70 LPI serrations, black oxide finish, 3/16” hex screw retention |
|
Rear Sight: .150” wide x .120” rear notch, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention |
|
Made in the USA, PATENTED design |
|
Drift adjustable rear only |
|
Installation recommended by a qualified gunsmith only. |
Sevigny Competition w/fiber optic front sight |
Same as the “Competition”, with a fiber optic front sight. When heated, the 1mm fiber optic rod melts to a 1/16 th of an inch diameter. The top of the rod diameter and top of the front sight appear flush when aiming. |
|
Specifications: |
|
Front Sight: .115” wide x .215” tall, 70 LPI serrations, 1mm fiber optic through diameter with a .060” front counterbore, black oxide finish, 3/16” hex screw retention. Green and Red, 1mm (.040”) fiber optic rod included, approx. 2 ½” long |
|
Rear Sight: .150” wide x .120” rear notch, .250” tall, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention |
|
Made in the USA, PATENTED design |
|
Drift adjustable rear only |
|
Installation recommended by a qualified gunsmith only. |
Sevigny Carry |
Same as the “Competition”, with a wider front sight and rounded outer corners on the rear sight. |
|
Specifications: |
|
Front Sight: .125” wide x .215” tall, no serrations, black oxide finish, 3/16” hex screw retention |
|
Rear Sight: .150” wide x .120” rear notch, .250” tall, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii top corners, designed to be more “Carry Friendly” with rounded outer corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention |
|
Made in the USA, PATENTED design |
|
Drift adjustable rear only |
|
Installation recommended by a qualified gunsmith only. |
Sevigny Carry w/Tritium |
Same as the “Carry”, with Tritium inserts for low light use. |
|
Specifications: |
|
Front Sight: .125” wide x .215” tall, no serrations, black oxide finish, 3/16” hex screw retention |
|
Rear Sight: .150” wide x .120” rear notch, .250” tall, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii top corners, designed to be more “Carry Friendly” with rounded outer corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention |
|
Tritium installed by Trijicon. Large green tritium front with white outline. Small yellow tritium rear .Vertical two dot configuration. |
|
Made in the USA, PATENTED design |
|
Drift adjustable rear only |
|
Installation recommended by a qualified gunsmith only. |
